How To Create an Overlap Seam using 3M™ Extreme Sealing Tape

C.W. Hayden Co. How To Series

When you apply extreme sealing tape you might find you come to an end of a roll of tape. If you come to the end of a roll, you’ll need to do an overlap seam.

To do an overlap seam, follow the 3 simple steps below:

Step 1:

Place your new roll of tape approximately 3 inches over the end of your existing roll of tape.

Step 2:

Next roll it down with a hand roller, remove the protective liner strip and do a final roll down of the tape.

Step 3:

Finally, using a soft squeegee make sure to press the tape into the overlap. Now you’ve created a nice tight seam!

C.W. Hayden supplies Extreme Sealing Tape and more. Visit our Translucent Extreme Sealing Tape or Gray Extreme Sealing Tape pages.