3M™ Perfect-it™ EX AC Rubbing Compound 36060 Quart (6 EA/CS)

Longer Working Time, Easier Cleanup Even in Extreme Conditions
As part of a complete system for creating showroom grade finishes, our 3M™ Perfect It™ EX AC Rubbing Compound is the ideal compound for the critical pre polishing stage in collision repair. This fast cutting, fine finishing compound removes fine grade (P1200 or finer) sand scratches and small surface defects on automotive painted surfaces. The compound works especially well on newer, harder to buff clear coat systems. It is formulated for longer work times, even in extreme conditions – especially important in places where heat and humidity are common inside or outside of the shop. The rubbing compound won’t become sticky during use or leave a powder or film residue that can cause rework. Yet it holds on the compounding pad, reducing the mess, waste and cleanup time associated with sling.

This rubbing compound is available in a range of quantities including convenient, job sized packets for maximized product use and inventory control. Quite simply, our 3M™ Perfect It™ EX AC Rubbing Compound is the highest performing rubbing compound 3M has introduced for better efficiency and lower process times, both during use and through creating defect free surfaces prior to polishing.

An Excellent Finish, Fast
At the heart of this specially formulated polish is aluminum oxide, the same mineral used in many of our top performing abrasive discs and sheets. In fact, fine grade aluminum oxide abrasive discs are part of the Scratch Refinement stage of our Perfect It™ Paint Finishing System, which includes our 3M™ Perfect It™ EX AC Rubbing Compound. This rubbing compound cuts quickly and uniformly to remove fine sand scratches and surface defects.

Part of the 3M™ Perfect It™ Paint Finishing System
3M™ Perfect It™ EX AC Rubbing Compound is integral to our 3M™ Perfect it™ Paint Finishing System. Developed to keep pace with evolving paint and clear coat technologies, the Perfect it™ Paint Finishing System is ideal when the finest finish is required for every level of clear coat and paint repair. This system uses a progressive series of abrasives, buffing and compounding pads, and specially formulated compounds and polishes across four stages of repair to produce showroom grade finishes with deep color and rich gloss. 3M™ Perfect It™ EX Rubbing Compound is crucial for the Perfect it™ Paint Finishing System, after scratch refinement and prior to polishing.

To reduce compounding time, we recommend refining scratches with 3M™ Trizact 3000 and 3M™ Trizact 5000 grit abrasive discs. Compound between 1200 and 2000 RPM using a 3M™ Perfect It™ Foam Compounding Pad, PN 05706.

The 3M™ Perfect It™ Brand: 3M’s Highest Quality Solution for Finishing Coated Surfaces
The Perfect It brand represents a complete range of solutions designed for busy shops to achieve perfect defect free finishes, every time, in as little time as possible. Perfect It brand products have been developed according to a step by step system – there’s no need to create your own processes to get the best finish. Premium product performance means shorter process times at every step. You use less material, and you have less material to clean up. In all, the Perfect It brand products let you complete more jobs in the same amount of time. You get better throughput, the finest and most consistent finishes, and increased customer satisfaction with every job.