3M™ Stikit™ Film Disc Roll 360L 5 in x NH P800 (125 DS/RL) (4 RL/CS)

3M™ Stikit™ Film Disc Roll 360L are constructed of aluminum oxide abrasive grain on a film backing and work well for fine sanding on plastics, gel coats, and polyurethane solid surface substrates. 

Our discs feature a sturdy film backing that provides the durability needed for a high-production environment, and offer excellent resistance to edge tearing to increase the life of the disc over discs with standard A-weight paper backings. At the same time, the film backing provides a close-tolerance, consistent finish, making it a good choice for applications such as spot repairs, sanding plastic parts, paint feathering on defects, or sanding automotive primer.

To help reduce loading on the disc, the disc has open coat construction without a load-resistant stearate coating. The Stikit adhesive on the backing conveniently attaches the disc to a low-profile 3M™ Stikit™ Disc Pad (sold separately) on a random orbital sander. 3M™ Stikit™ Film Disc Roll 360L comes in a range of grades for various applications from fine sanding to finishing.

Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. An open coat means the abrasive grains have space between them so that sanding debris collects in the spaces rather than loading the cutting edge of the grains. This feature has the added advantage of producing a more aggressive cut.

We chose aluminum oxide abrasive, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.

Our 3M™ Stikit™ system eliminates the time-consuming task of applying adhesive to the disc backing. These high-quality, coated abrasive products come ready to use with a pressure sensitive adhesive coating on the backside so that attaching them to your disc pad is as simple as pressing on a sticker. And because the adhesive is pressure sensitive, the disc can be peeled off of the disc pad just as easily, leaving a clean surface for your next disc. A Stikit disc must be pressed onto a Stikit backup pad (also called a disc pad and sold separately) that is attached to a disc sander, random orbital sander, or stationary disc sander.